ALUMINIUM: Manuals-Handbooks-Guides-Monographs
- Aluminum Castings Engineering Guide/ J. Nath
- Aluminum Recycling and Processing for Energy Conservation and Sustainability // ed. JOHN A.S. GREEN – ASM International, 2007
- Fundamentals of Aluminium Metallurgy – Production, Processing and Applications – Woodhead Publishing, 2011
- Light Metals /ed. Corleen Chesonis – Springer, 2019 – Preview
- Encyclopedia of Aluminum and Its Alloys — Two Volumes / ed. George E. Totten et al — 2019 – Preview
- Aluminum and aluminum alloys /ed. JR Davis – ASM Speciality Handbook, ASM International – 1993 – Fragment – Preview
- Aluminum Extrusion Manual – Aluminum Extruders Counsil (AEC) – 2013
- Aluminum Extrusion Technology /Pradip K. Saha – ASM International – 2000 – Есть русский перевод
- Aluminum Alloy Castings: Properties, Processes, and Applications / J. Gilbert Kaufman & Elwin L. Rooy – American Foundry Society – ASM International – 2004
- Aluminum Cast Alloys: Enabling Tools for Improved Performance /D. Apelian – NADCA – 2009
- MATERIALS FOR ARCHITECTS AND BUILDERS – Fourth edition / A. Lyons – 2010
- Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes / ed. George E. Totten, D. Scott MacKenzie – 2003
- Handbook of Aluminum: Volume 2: Alloy Production and Materials Manufacturing / ed. George E. Totten, D. Scott MacKenzie – 2003
- Atlas of Aluminum Microstructure / George F. Vander Voort // Analytical Characterization of Aluminum, Steel, and Superalloys – ed. D. Scott MacKenzie, George E. Totten – 2006 – Preview
- Extrusion Press Maintenance Manual / Al Kennedy
- Designing with Aluminum Alloys /Nack J. Kim //Handbook of Mechanical Alloy Design / ed. G.E. Totten, George Em Totten and Kiyoshi Funatani – 2004 – pp. 441-486.
- Corrosion of Aluminium /Christian Vargel – 2004
- DESIGN OF LIGHTWEIGHT FAÇADES – Architectural Project Introduction Handbook – Hydro Building Systems, 2007
- Introduction to Aluminum Alloys and Tempers /J. Gilbert Kaufman – ASM International – 2000
- Fundamentals of Metallurgy /ed. S. Seetharaman – 2005
- Fundamentals of Modern Manufacturing – Materials, Processes, and Systems /Mikell P. Groover – 2010
- Extrusion – Second Edition /M. Bauser G., Sauer K., Siegert –ASM International, 2006 – Contents – Preview – См. здесь русский перевод
- The Identification and Prevention of Defects on Anodized Aluminium Parts /Ted Short – Aluminium Finishing Consultant – 2003
- Aluminum in Aircraft /Alcoa – 1941
- Solar Design Manual /Hydro – 20xx
The Aluminium Automotive Manual
- Design – Design with Aluminium
- Materials – Alloy constitution
- Materials – Designation system
- Products – Extruded products
- Materials – Resources
- Manufacturing – Casting methods
Источник: European Aluminium Association
To be continued
