Theses & Dissertations
- Characterization of microstructure in aluminum alloys based on electron backscatter diffraction /Tobias Kayser – Dr.-Ing. Dissertation – Technical University of Dortmund – 2011
- The Effect of Extrusion Conditions on Yield Strengh of 6060 Aluminium Alloy /X. Chen – Master Thesis – Auckland University of Technology – 2008
- Effects of Extrusion Conditions on “Die Pick-Up” Formed During Extrusion of Aluminium Alloy AA6060 /R.G. Peris – Master Thesis – Auckland University of Techology– 2007
- Effect of Preheating Condition on Strength AA6060 Aluminium Alloy for Extrusion /Cheng Meng – Master Thesis – Auckland University of Technology – 2010
- Influence of Quench Rate on Hardness Obtained after Artificial Ageing of an Al-Si-Mg Alloy /F. Fracasso – Master Thesis – Jönköping Institute of Technology – 2010
- Development in Finite Element Simulations of Aluminium Extrusion /Joeri Lof – PhD Thesis – Twente University – 2000
- Simulation of Aluminium Extrusion Process /I. Flitta – PhD Thesis – Bournemouth University – 2004
- Numerical Modelling of the Aluminium Extrusion Process when Producing Complex Sections /L. Niu – PhD Thesis – Bournemouth University – 2010
- Pressure and Strain Measurement During Hot Extrusion of Aluminium /Per Thomas Moe – PhD Thesis – Norwegian University of Science and Technology – 2005
- Removal of dissolved elements in aluminium by filtration /Harald Görner – PhD Thesis – Norwegian University of Science and Technology – 2009
- Energy Consumption and Carbon Footprint of Secondary Aluminum Cast House /Wenjing Wei – Master Thesis – Royal Institute of Technology, Sweden – 2012
- Feature Based Costing of Extruded Parts /J.T. Nieto – Master Thesis – University of Illinois – 2010
- The Effect of Mn and Homogenisation Procedure on Mechanical Properties and Grain Structure in Extruded AA6082 /M. Bru – Master Thesis – Norwegian University of Science and Technology – 2010
- CAD Implementation of Design Rules for Aluminium Extrusion Dies / G. van Ouwerkerk – University of Twente, 2009
- Removal of dissolved elements in aluminium by filtration /Harald Görner – PhD Thesis – Norwegian University of Science and Technology – 2009
- Direct Chill and Fusion Casting of Aluminum Alloys /R. E. O. Pelayo – Master Thesis – University of Waterloo, Ontario, Canada – 2012
- Inclusions and Hydrogen and Their Effects on the Quality of Direct Chill Cast and Flat Rolled Aluminium Alloys for Aerospace Applications / A. J. Gerrard – Doctor of Engineering Thesis – University of Birmingham – 2014
- Casting practices influencing inclusion distribution in Al-billets / Ghadir Razaz – Master Thesis – Karlstads University – 2013
To be continued